Draft Fisheries Assessment – Turbot Bank NCMPA: Fisheries management measures within Scottish Offshore Marine Protected Areas (MPAs)

These assessments look at the fishing activity occurring within each offshore MPA and SAC and assess the potential impacts of this activity on the protected features within each site. This assessment is for Turbot Bank NCMPA.


2. Part A Assessment – Fisheries Screening

2.1 Fisheries screening overview

Part A of this assessment considers whether the fishing activity would be capable of impacting the protected features of an NCMPA or any ecological or geomorphological process on which the conservation of any protected feature is dependent. This section looks at the pressures exerted by the fishing activity occurring in the site (within the assessment period) in relation to the sensitivities of the protected features. Activities potentially capable of impacting the protected features were identified where there was both a medium-high risk of a pressure arising from the fishing activity and if any of the features were considered sensitive to that pressure. These pressure-features interactions were then taken forward to the fisheries assessment stage (Part B) to determine whether the fishing activity in question would or might hinder the achievement of the conservation objectives.

For each activity assessed in Part A, there were two possible outcomes for each identified pressure-feature interaction:

1. The pressure-feature interactions were not included for Part B:

a. If the feature is not exposed to the pressure, and is not likely to be in the future; or

b. If the effect/impact of the pressure is non-existent or insignificant.

2. The pressure-feature interactions were included for assessment in Part B:

a. If the feature is exposed to the pressure, or is it likely to be in the future; and

b. If the pressure is capable of impacting the feature; or

c. If it is not possible to determine whether the pressure is capable of impacting the feature.

Part B of the assessment considers the potential for activities to impact the feature by assessing the impact of fishing gears identified in Part A. This involves determining the potential level of interaction between the feature and the fishing activity, assessing the potential impact on the feature, and subsequently if fishing activities would or might hinder the achievement of the conservation objectives for the site.

Consideration of exposure to and the effect of a pressure on a protected feature of the NCMPA includes the consideration of exposure to and the effect of that pressure on any ecological or geomorphological process on which the conservation of the protected feature is wholly or in part dependant.

The JNCC conservation advice package, management options paper and the Scottish MPA Project Fisheries Management Guidance: Sandeels (Ammodytes marinus and A. tobianus) has been used to inform this assessment. These are the most recent assessment package and options paper available.

Where appropriate, this advice has been supplemented by information on pressures associated with fishing activity from the JNCC Marine Pressures-Activities Database (PAD) v1.5 2022 and the Feature Activity Sensitivity Tool (FeAST).

2.2 Activities taking place within Turbot Bank NCMPA

To screen out fishing activities that were not taking place within the site or likely to take place in the future, vessel monitoring system (VMS) data within Turbot Bank NCMPA from 2015 – 2019 were analysed to identify the gear types being used in the site. The data showed that demersal trawls, boat dredges, demersal seines and pelagic fishing occurred within the site during the assessment period. Types and codes are detailed in Table 1.

Table 1. Gear types recorded from the site based on VMS data from 2015 – 2019.
Gear type Specific Gear Type Gear code Aggregated gear method
Towed Bottom otter trawl OTB Demersal trawls
Multi-rig trawls OTT
Bottom trawls (not specified) TB
Bottom pair trawl PTB
Towed dredges DRB Boat dredge
Seine Scottish Seine SSC Demersal seine
Towed (pelagic) Mid-water pair trawl PTM Pelagic fishing
Mid-water trawl (single) OTM

2.3 Potential pressures exerted by site fishing activity

According to the JNCC Turbot Bank NCMPA management options paper (2014), the fishing activities considered capable of impacting sandeel are specialised mesh trawling for sandeel.

The potential pressures that could be exerted by fishing activity of impacting the sandeel were determined using information on activity-pressure relationships in the JNCC Marine Pressures-Activities Database (PAD) v1.5 2022. The potential pressures exerted by boat dredges, demersal seines, demersal trawls, pelagic fishing are summarised in Table 2.

Table 2. Potential pressures exerted by pelagic, demersal trawls, demersal seines, boat dredges taken from the JNCC Marine Pressures-Activities Database (PAD) v1.5 2022. The PAD risk profiling score represents the general risk the pressures pose to the environment under normal conditions. Pressures are categorised as posing a medium/high risk (dark blue) or low risk (light blue). Pressures that are not exerted by the fishing activity are classed as not relevant (white).
PAD Pressure Pelagic Demersal trawls Demersal Seines Boat Dredge
Deoxygenation Low Low Low Low
Hydrocarbon & PAH contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC. Low Low Low Low
Nutrient enrichment Not relevant Low Low Low
Organic enrichment Low Low Low Low
Synthetic compound contamination (incl. pesticides, antifoulants, pharmaceuticals). Includes those priority substances listed in Annex II of Directive 2008/105/EC. Low Low Low Low
Transition elements and organo-metal (e.g. TBT) contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC Low Low Low Low
Above water noise Low Low Low Low
Abrasion/disturbance of the substrate on the surface of the seabed Not relevant Medium-high Medium-high Medium-high
Changes in suspended solids (water clarity) Not relevant Medium-high Medium-high Medium-high
Collision above water with static or moving objects not naturally found in the marine environment (e.g., boats, machinery, and structures) Low Not relevant Not relevant Not relevant
Collision below water with static or moving objects not naturally found in the marine environment (e.g. boats, machinery and structures) Low Low Low Low
Introduction of light Low Low Low Low
Litter Low Low Low Low
Penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion Not relevant Medium-high Medium-high Medium-high
Physical change (to another seabed type) Not relevant Low Low Low
Physical change (to another sediment type) Not relevant Low Low Low
Barrier to species movement Low Not relevant Not relevant Not relevant
Introduction of microbial pathogens Not relevant Not relevant Not relevant Low
Introduction or spread of invasive non-indigenous species (INIS) Low Low Low Low
Removal of target species Medium-high Medium-high Medium-high Medium-high
Removal of non-target species Medium-high Medium-high Medium-high Medium-high
Smothering and siltation rate changes (Light) Not relevant Medium-high Medium-high Medium-high
Underwater noise changes Low Low Low Low
Visual disturbance Low Low Low Medium-high

2.4 Significance of effects/impacts to protected features

In the absence of JNCC Advice on Operations advice package for this site, the Feature Activity Sensitivity Tool (FeAST) was used to determine the potential sensitivity of the sandeel feature (Table 3) to the pressures exerted by the relevant fishing activities (Table 2) occurring within Turbot Bank MPA.

Table 3 identifies the pressures from particular gears that could be capable of affecting the feature. Where a pressure from a particular gear is identified as being capable of impacting a feature, justification is provided.

To ensure the effects of fishing activities in-combination with other activities (including other fishing activities) are fully assessed, the pressures from fishing activities which were not identified as being capable of impacting a feature but which do interact with the feature are considered in the in-combination aspect of the assessment (Part C).

Table 3. Summary of the FeAST sensitivity assessment for sandeel using the pressures associated with demersal fishing activities accruing in the site (Table 2). The sandeel sensitivity is categorised as having high sensitivity (dark blue), medium sensitivity (dark blue), sensitive (light blue), not sensitive (white), not exposed (white), not assessed (white) and unknown (white). Further details on these categories are available in the associated methods document.
Potential Pressure Protected feature sensitivity- sandeel
Deoxygenation Not relevant
Hydrocarbon & PAH contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC. Sensitive
Nutrient enrichment Not assessed
Organic enrichment Medium
Synthetic compound contamination (incl. pesticides, antifoulants, pharmaceuticals). Includes those priority substances listed in Annex II of Directive 2008/105/EC. Sensitive
Transition elements and organo-metal (e.g. TBT) contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC Sensitive
Above water noise Unknown
Abrasion/disturbance of the substrate on the surface of the seabed Medium
Changes in suspended solids (water clarity) Not assessed
Collision above water with static or moving objects not naturally found in the marine environment (e.g., boats, machinery, and structures) Not assessed
Collision below water with static or moving objects not naturally found in the marine environment (e.g. boats, machinery and structures) Not assessed
Introduction of light Unknown
Litter Unknown
Penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion High
Physical change (to another seabed/sediment type) High
Underwater noise changes Not assessed
Barrier to species movement Not relevant
Introduction of microbial pathogens Not relevant
Introduction or spread of invasive non-indigenous species (INIS) Not assessed
Removal of target species High
Removal of non-target species Not relevant
Smothering and siltation rate changes (Light) Medium
Visual disturbance Not relevant

Considering both the information on the pressure activity association (Table 2) and the sensitivity of sandeel feature (Table 3), pressures that have potential to impact the feature are summarised in Table 4.

Pressures that are not relevant to pelagic, demersal trawls, demersal seines and boat dredging (pressures that are not exerted by that fishing activity: ‘not relevant to the activity in Table 2) do not need to be considered further in this assessment. According to the PAD methods document (Robson et al., 2018), pressures with low risk profiles (i.e. ‘low’ risk profile for the activity: Tables 2 & 4) generally do not occur at a level of concern and should not require consideration as part of an assessment, unless there are evidence-based case or site-specific factors that increase the risk, or there is uncertainty on the level of pressure on a receptor. Pressures with ‘medium-high’ risk profiles are commonly induced by the activity at a level that needs to be considered further as part of an assessment.

Pressures that were not relevant to the feature, do not need to be considered further in the assessment (Table 3). Pressures from the FeAST sensitivity for sandeel that was ‘not sensitive ‘or ‘not exposed’ can also be screened out. Any pressures that do not have a sensitivity assessment (either ‘not assessed’ or ‘no evidence’) should be considered as this does not mean that the feature is not sensitive, only that there is insufficient evidence to make an assessment.

Pressures with a medium-high risk profile in PAD and to which FeAST assessed the feature as being sensitive, medium sensitivity or high sensitivity have the potential to impact the feature.

Of all the pressures considered, four were found to have medium-high risk profiles from the fishing activity occurring within the site (PAD) and the feature was found to have medium-high sensitivity (FeAST): abrasion/disturbance of the substrate on the surface of the seabed; changes in suspended solids (water clarity); penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion and smothering and siltation rate changes (light) (Table 4). These four pressures are subsequently considered to have the potential to impact the sandeel feature. All four of these pressures are exerted by demersal trawls, demersal seines and boat dredges. Pelagic fishing was shown to have no or low risk profiles and was therefore not considered further as the there was no potential to impact the sandeel feature.

To ensure the effects of fishing activities in-combination with other activities (including other fishing activities) are fully assessed, the pressures from fishing activities (pelagic fishing) which were not considered capable of impacting the feature but which do interact with the features are considered in the in-combination aspect of the assessment (Part C).

Table 4. Summary of pressures that have the potential to impact the feature, based on pressure-activity associations (Table 2) and sensitivity of the sandeel feature (Table 3). Pressures with the potential to impact the feature are in dark blue.
Potential Pressure Fishing activity
Pelagic Demersal trawls Demersal Seines Boat Dredge
Above water noise No – low risk profile
Abrasion/disturbance of the substrate on the surface of the seabed Not relevant Yes – Medium-high risk profile and sandeel considered sensitive Yes – Medium-high risk profile and sandeel considered sensitive Yes – Medium-high risk profile and sandeel considered sensitive
Barrier to species movement No – Low risk profile or not relevant
Changes in suspended solids (water clarity) Not relevant Yes – Medium-high risk profile and sandeel sensitivity not assessed Yes – Medium-high risk profile and sandeel sensitivity not assessed Yes – Medium-high risk profile and sandeel sensitivity not assessed
Collision above water with static or moving objects not naturally found in the marine environment (e.g., boats, machinery, and structures) No – Low risk profile or not relevant
Collision below water with static or moving objects not naturally found in the marine environment (e.g. boats, machinery and structures) No – low risk profile
Deoxygenation No – low risk profile
Hydrocarbon & PAH contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC. No – low risk profile
Introduction of light No – low risk profile
Introduction of microbial pathogens No – Low risk profile or not relevant
Introduction or spread of invasive non-indigenous species (INIS) No – low risk profile
Litter No – low risk profile
Nutrient enrichment No – Low risk profile or not relevant
Organic enrichment No – low risk profile
Penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion No - Not relevant Yes – Medium-high risk profile and sandeel considered sensitive Yes – Medium-high risk profile and sandeel considered sensitive Yes – Medium-high risk profile and sandeel considered sensitive
Physical change (to another seabed type) No – Low risk profile or not relevant
Physical change (to another sediment type) No – Low risk profile or not relevant
Removal of target species No – Despite a medium-high risk profile and sandeel considered sensitive no gears were found to target sandeel
Removal of non-target species No – Medium-high risk profile however not relevant to protected features
Smothering and siltation rate changes (Light) No – Not relevant Yes – Medium-high risk profile and sandeel considered sensitive Yes – Medium-high risk profile and sandeel considered sensitive Yes – Medium-high risk profile and sandeel considered sensitive
Synthetic compound contamination (incl. pesticides, antifoulants, pharmaceuticals). Includes those priority substances listed in Annex II of Directive 2008/105/EC. No – low risk profile
Transition elements and organo-metal (e.g. TBT) contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC No – low risk profile
Underwater noise changes No – low risk profile
Visual disturbance No – low risk profile No – low risk profile No – low risk profile No – Medium-high risk profile however not relevant to protected features

2.5 Part A conclusion

Considering the information on pressures and sensitivity above, demersal trawls, demersal seines and boat dredges are deemed to have the potential to impact sandeel feature within Turbot Bank MPA, through abrasion/disturbance of the substrate on the surface of the seabed; changes in suspended solids (water clarity), penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion; and smothering and siltation rate changes (light). Pelagic fishing does not have the potential to impact sandeel within Turbot Bank MPA. The four pressures considered to have the potential to impact the sandeel feature are taken through to Part B of the assessment.

Contact

Email: marine_biodiversity@gov.scot

Back to top