Draft Fisheries Assessment – Wyville-Thomson Ridge SAC: Fisheries management measures within Scottish Offshore Marine Protected Areas (MPAs)

These assessments look at the fishing activity occurring within each offshore MPA and SAC and assess the potential impacts of this activity on the protected features within each site. This assessment is for Wyville-Thomson Ridge SAC.


2. Part A Assessment – Fisheries Screening

2.1 Fisheries screening overview

Part A of this assessment meets the ‘likely significant effect (LSE)’ test under Article 6(3) of Council Directive 92/43/EEC of 21 May 1992 on the conservation of natural habitats and of wild fauna and flora (the Habitats Directive); for sites within the offshore region under Regulation 28 of the Conservation of Offshore Marine Habitats and Species Regulations 2017. The test for likely significant effect under Regulation 28(2)(b) of the Conservation of Offshore Marine Habitats and Species Regulations 2017 is not required for activities which are directly connected with or necessary to the management of the site. Fishing activities are not considered to be directly connected with or necessary to the management of the site unless otherwise indicated.

In line with the guidance within in EU Commission guidance on the Assessment of plans and projects significantly affecting Natura 2000 sites; a methodological guidance on the provisions of Article 6 (3) and (4) of the Habitats Directive 92/43/EEC this assessment consider a Likely Significant Effect (LSE) as any effect that may reasonably be predicted as a consequence of a plan or project that would negatively and significantly affect the conservation objectives established for the habitats and species of the protected area. If any likely significant effect of a plan or project cannot be excluded beyond reasonable doubt, then a full appropriate assessment should be undertaken.

In Part A of this assessment the pressure-feature interactions were assessed to determine the potential of LSE and risk to the conservation objectives. This section looks at the pressures exerted by the fishing activity occurring in the site (within the assessment period) in relation to the sensitivities of the protected features. An LSE was identified where there was a medium-high risk of a pressure arising from the fishing activity and if any of the features were considered sensitive to that pressure. These pressure-features interactions were then taken forward to the appropriate assessment stage (Part B) to determine the significance of that interaction within the site.

For each activity assessed in Part A, there were three possible outcomes for each identified pressure-feature interaction:

1. The pressure-feature interactions were not included for Part B:

a. If the feature is not exposed to the pressure, and is not likely to be in the future; or

b. If the effect/impact of the pressure is not likely to be significant.

2. The pressure-feature interactions were included for assessment in Part B:

a. If the feature is exposed to the pressure, or is it likely to be in the future; and

b. If the potential scale or magnitude of any effect is likely to be significant; or

c. If it is not possible to determine whether the magnitude of any effect is likely to be significant.

Part B of the assessment aligns with the requirements for an Appropriate Assessment under the Conservation of Offshore Marine Habitats and Species Regulations 2017 (as amended) and considers the potential impact to site integrity by assessing the impact of fishing gears identified in Part A. This involves determining the potential level of interaction between the feature and the fishing activity, assessing the potential impact on the feature, and subsequently if fishing activities are liable to affect the conservation objectives of the site and thus the integrity of the site.

This involves determining the level of interaction between the feature and the fishing activity, assessing the potential impact on the feature, and subsequently if fishing activities are liable to affect the conservation objectives of the site and thus the integrity of the site.

Consideration of exposure to or effect of a pressure on a protected feature of the SAC includes the consideration of exposure to or effect of that pressure on any ecological or geomorphological process on which the conservation of the protected feature is wholly or in part dependant.

The JNCC Advice package, Advice on Operations and JNCC Marine Pressures-Activities Database (PAD) v1.5 2022 has been used to inform this assessment. This is the most recent assessment package available.

2.2 Activities taking place within Wyville Thomson Ridge SAC

To screen out fishing activities that were not taking place within the site or likely to take place in the future, vessel monitoring system (VMS) data within Wyville Thomson Ridge SAC from 2015 – 2019 were analysed to identify the gear types being used in the site and the aggregated gear method (Table 1). The gear types identified from 2015-2019, VMS align with those included in the Wyville-Thomson Ridge SAC Conservation Advice package from the JNCC Site Information Centre. The fishing gears screened out at this stage were not taken forward to Part B of the assessment.

Table 1. Gear types recorded from the site based on VMS data from 2015 – 2019.
Gear type Specific gear type Gear code Aggregated gear method
Towed Bottom otter trawl OTB Demersal trawls
Towed (pelagic) Mid-water trawl OTM Pelagic trawl
Lines Set longlines LLS Anchored nets/line

2.3 Potential pressures exerted by site fishing activity on protected features

The potential pressures that could be exerted by fishing activities considered capable of affecting the Annex I reef feature (demersal trawl and anchored nets/line) were determined using information on activity-pressure relationships in the JNCC Marine Pressures-Activities Database (PAD) v1.5 2022. The potential pressures that could be exerted by demersal trawls and anchored nets/lines are summarised in Table 2.

Pelagic fishing, in particular mid-water trawl, whilst occurring in the site does not contact the seabed. Accordingly, as per the JNCC Advice on Operations Workbook V1.0, pelagic mid-water trawl fishing have been classified as not relevant to the protected features within the site. This has been established using best available evidence which indicates there is no interaction of concern between the pressure and the feature OR the activity and the feature could not interact. As a result pelagic gear is not considered further in this assessment.

Table 2. Potential pressures from the JNCC Marine Pressures-Activities Database (PAD) v1.5 2022 and their risk profiling of pressures score, based on the general risk the pressures pose to the environment under normal conditions. Pressures are considered to pose a medium/high risk (dark blue), low risk (light blue), or are not relevant to the activity (white).
PAD Pressure Fishing activity
Demersal trawls Anchored nets/line
Transition elements and organo-metal (e.g. TBT) contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC Low Low
Hydrocarbon & PAH contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC. Low Low
Synthetic compound contamination (incl. pesticides, antifoulants, pharmaceuticals). Includes those priority substances listed in Annex II of Directive 2008/105/EC. Low Low
Deoxygenation Low Low
Nutrient enrichment Low Not relevant
Organic enrichment Low Low
Physical change (to another seabed type) Low Not relevant
Abrasion/disturbance of the substrate on the surface of the seabed Medium-high Medium-high
Penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion Medium-high Low
Changes in suspended solids (water clarity) Medium-high Not relevant
Smothering and siltation rate changes (Light) Medium-high Not relevant
Litter Low Low
Underwater noise changes Low Low
Introduction of light Low Low
Barrier to species movement Not relevant Low
Collision BELOW water with static or moving objects not naturally found in the marine environment (e.g. boats, machinery and structures) Low Low
Visual disturbance Low Low
Introduction or spread of invasive non-indigenous species (INIS) Low Low
Removal of target species Medium-high Medium-high
Removal of non-target species Medium-high Medium-high

2.4 Significance of effects

To determine whether each pressure is likely to have a significant effect on the site’s features, the sensitivity assessments and risk profiling of pressures from the JNCC conservation advice package and the JNCC Marine Pressures-Activities Database (PAD) v1.5 2022 were used.

Table 3 identifies the pressures from the relevant gears (demersal trawl and anchored net/line fishing) that could have a likely significant effect on the feature. Where a pressure from a particular gear is identified as not having a likely significant effect on a feature, the descriptors to justify this are described below. To ensure the effects of fishing activities in-combination with other activities (including other fishing activities) are fully assessed, the pressures from fishing activities which were not identified as having a likely significant effect but which do interact with the feature are considered in the in-combination aspect of the assessment (Part C).

Table 3. Extract of the Advice on Operations for Wyville Thomson Ridge SAC showing pressures relevant to fishing activity and the potential sensitivity of the protected features. The features are categorised as having High Sensitivity (dark blue), Medium Sensitivity (dark blue), Sensitive (light blue), Not Sensitive (white), Not Exposed (white), Not Assessed (white), and Unknown (white). Further details on these categories are available in the associated methods document.
Potential pressure Protected Feature
Annex I Reef; stony and bedrock
Demersal trawl Anchored net/line
Above water noise Not relevant Not relevant
Abrasion/disturbance of the substrate on the surface of the seabed Sensitive Sensitive
Changes in suspended solids (water clarity) Not relevant Not relevant
Collision ABOVE water with static or moving objects not naturally found in the marine environment (e.g., boats, machinery, and structures) Not relevant Not relevant
Collision BELOW water with static or moving objects not naturally found in the marine environment (e.g., boats, machinery, and structures) Not relevant Not relevant
Deoxygenation Not sensitive Not sensitive
Hydrocarbon & PAH contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC. Insufficient evidence Insufficient evidence
Introduction of light Not assessed Not assessed
Introduction or spread of non-indigenous species Sensitive Sensitive
Litter Not assessed Not assessed
Nutrient enrichment Not sensitive Not relevant
Organic enrichment Sensitive Sensitive
Penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion Sensitive Sensitive
Physical change (to another seabed type) Sensitive Not relevant
Removal of non-target species Sensitive Sensitive
Removal of target species Sensitive Sensitive
Siltation rate changes (Low), including smothering (depth of vertical sediment overburden) Sensitive Not relevant
Synthetic compound contamination (incl. pesticides, antifoulants, pharmaceuticals). Includes those priority substances listed in Annex II of Directive 2008/105/EC. Insufficient evidence Insufficient evidence
Transition elements & organo-metal (e.g. TBT) contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC. Insufficient evidence Insufficient evidence
Underwater noise changes Not sensitive Not sensitive
Visual disturbance Not relevant Not relevant

Considering both the information on the pressure activity association (Table 2) and the sensitivity of the reef feature (Table 3), pressures with the potential to cause likely significant effects are summarised in Table 4.

Pressures that are not relevant to demersal trawls and anchored nets/longlines (pressures that are not exerted by that fishing activity: ‘not relevant to the activity’ in Table 4 do not need to be considered further in the assessment. According to the PAD methods document, pressures with low risk profiles (i.e. ‘low risk profile for the activity’: Table 2) generally do not occur at a level of concern and should not require consideration as part of an assessment, unless there are evidence-based case or site-specific factors that increase the risk, or there is uncertainty on the level of pressure on a receptor. Pressures with ‘medium-high’ risk profiles are commonly induced by the activity at a level that needs to be considered further as part of an assessment.

Pressures that were not relevant to the feature, do not need to be considered further in the assessment (Table 4). Pressures where the feature was ‘not sensitive’ (Table 3) can also be screened out. Any pressures that do not have a sensitivity assessment (either ‘not assessed’ or ‘no evidence’) should be considered as this does not mean that the feature is not sensitive, only that there is insufficient evidence to make an assessment.

Pressures with a medium-high risk profile in PAD and to which the Advice on Operations identified the feature as being sensitive would meet the definition of a likely significant effect (“any effect that may reasonably be predicted as a consequence of a plan or project that would negatively and significantly affect the conservation objectives established for the habitats and species significantly present on the site”: EU Commission, 2021). Of the pressures considered, there are five which have medium-high risk profiles and to which the feature is sensitive (Table 4); abrasion/disturbance of the substrate on the surface of the seabed; penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion; smothering and siltation rate changes (light); removal of non-target species and removal of target species.

These five pressures are subsequently considered to have the potential to have likely significant effects (LSE) on the Annex I reef feature. These pressures are exerted by all three fishing activity types assessed: demersal trawls and anchored nets/lines.

Table 4. Summary of pressures that have the potential to cause likely significant effects, based on pressure-activity associations and sensitivity of the Annex I habitat. Pressures with the potential to cause likely significant effects are in dark blue.
Potential pressure Fishing activity
Demersal trawl Anchored net/line
Transition elements and organo-metal (e.g. TBT) contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC No - low risk profile for activity No - low risk profile for activity
Hydrocarbon & PAH contamination. Includes those priority substances listed in Annex II of Directive 2008/105/EC. No – although there is insufficient evidence to assess sensitivity, the risk profile for this activity is low. No - low risk profile for activity
Synthetic compound contamination (incl. pesticides, antifoulants, pharmaceuticals). Includes those priority substances listed in Annex II of Directive 2008/105/EC. No – although there is insufficient evidence to assess sensitivity, the risk profile for this activity is low. No - low risk profile for activity
Deoxygenation No - low risk profile for activity No - low risk profile for activity
Nutrient enrichment No - low risk profile for activity No – not relevant
Organic enrichment No - low risk profile for activity No - low risk profile for activity
Physical change (to another seabed type) No – although the sensitivity is not assessed, the risk profile for the activity is low No – not relevant
Abrasion/disturbance of the substrate on the surface of the seabed Yes - Medium-high risk profile and feature sensitive to pressure Yes - Medium-high risk profile and feature, sensitive to pressure
Penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion Yes - Medium-high risk profile and feature sensitive to pressure No – although the feature is sensitive to this pressure, the pressure has a low risk profile for the activity
Changes in suspended solids (water clarity) No - Medium-high risk profile, pressure Not relevant No – not relevant
Smothering and siltation rate changes (Light) Yes - Medium-high risk profile and feature sensitive to pressure No – not relevant
Litter No – although the sensitivity is not assessed, the risk profile for the activity is low No – although the sensitivity is not assessed, the risk profile for the activity is low
Underwater noise changes No - low risk profile for activity No - low risk profile for activity
Introduction of light No - low risk profile for activity No - low risk profile for activity
Collision BELOW water with static or moving objects not naturally found in the marine environment (e.g. boats, machinery and structures) No - low risk profile for activity No - low risk profile for activity
Visual disturbance No - not relevant No - not relevant
Introduction or spread of invasive non-indigenous species (INIS) No – although the feature is sensitive to this pressure, the pressure has a low risk profile for the activity No – although the feature is sensitive to this pressure, the pressure has a low risk profile for the activity
Removal of target species Yes - Medium-high risk profile and feature Sensitive to pressure Yes - Medium-high risk profile and feature sensitive to pressure
Removal of non-target species Yes - Medium-high risk profile and feature sensitive to pressure Yes - Medium-high risk profile and feature sensitive to pressure

2.5 Part A Conclusion

Considering the information on pressures and sensitivity above, and guidance within the EU Commission guidance on the Assessment of plans and projects significantly affecting Natura 2000 sites; a methodological guidance on the provisions of Article 6 (3) and (4) of the Habitats Directive 92/43/EEC, in relation to European sites, mobile demersal trawls and anchored net/line fishing have the potential to have a likely significant effect (LSE) on the reef feature within Wyville Thomson Ridge SAC, through the following pressures; abrasion/disturbance of the substrate on the seabed; penetration and/or disturbance of the substrate below the surface of the seabed, including abrasion; smothering and siltation rate changes (light); removal of target species and removal of non-target species. Accordingly, these pressures will be taken through to Part B of the assessment.

Contact

Email: marine_biodiversity@gov.scot

Back to top